Getting an electrical quote in Davis County and wondering if the price is fair? You're not alone. Electrical work is one of the most common home projects Utah homeowners get quoted on — and one of the hardest to evaluate without industry knowledge.

This guide breaks down real local pricing for the most common electrical jobs in Davis County, what red flags to watch for, and how to negotiate if something looks off.


What electrical work actually costs in Davis County in 2026

These ranges are based on verified job data from the 840xx ZIP codes — Clearfield, Layton, Kaysville, Bountiful, and surrounding areas.

Panel upgrade (200-amp, residential)

Typical range · Davis County 2026
200-amp Panel Upgrade
$1,800 – $4,000

A 200-amp panel upgrade is the most common major electrical job in Davis County. Older homes built in the 1970s–90s frequently have 100-amp panels that can't handle modern load demands — EVs, heat pumps, home offices.

What affects the price: retrofit vs. new build (retrofits cost more), whether the meter base needs replacement, distance from the panel to the main service entrance, and permit and inspection fees (typically $150–$400 in Davis County).

Red flag

Any quote under $1,500 for a full panel upgrade almost certainly excludes the permit or materials. Ask specifically: "Does this include the permit and all materials?"

EV charger installation (Level 2, 240V)

Typical range · Davis County 2026
Level 2 EV Charger Install
$800 – $2,400

Level 2 EV charger installs have surged in Davis County as Utah's EV adoption rate continues to climb. The range is wide because it depends heavily on whether a panel upgrade is required, distance from the panel to the garage, and whether conduit needs to run through finished walls.

Most common overcharge

Bundling the charger install with a panel upgrade without itemizing each cost. Always ask for a line-by-line breakdown so you know what you're paying for each scope.

Outlet installation / repair (GFCI)

Typical range · Davis County 2026
GFCI Outlet Installation
$100 – $250 per outlet

GFCI outlets are required in kitchens, bathrooms, garages, and outdoor areas in Utah. A straightforward swap on an existing outlet is on the low end. Outlets requiring new wiring runs or additional circuit capacity are on the high end.

Watch for

Quotes that charge per outlet but don't specify whether new wiring is included. A $75 outlet install that requires a new circuit run is actually a $400+ job.

Circuit breaker replacement

Typical range · Davis County 2026
Single Breaker Replacement
$150 – $350

Single breaker replacement on an existing panel is a relatively simple job. Prices above $350 for a single breaker on a standard panel are worth questioning unless there are complicating factors — old panels, aluminum wiring, or specialty breakers.

Service call / diagnostic fee

Typical range · Davis County 2026
Service Call / Diagnostic
$75 – $150

Most Davis County electricians charge a trip fee or diagnostic fee. Industry standard: the diagnostic fee is waived or applied toward the job if work is performed.

Recessed lighting / LED installation

Typical range · Davis County 2026
Recessed / LED Lighting
$150 – $300 per light

New construction is on the low end. Retrofit into finished ceilings — drywall cutting, fishing wire — is on the high end. A quote of $400+ per light in a standard home warrants a conversation.

Ceiling fan installation

Typical range · Davis County 2026
Ceiling Fan Installation
$150 – $400

Existing wiring and junction box: low end. New circuit required or installation in a vaulted ceiling: high end.


What permits cost in Davis County

Electrical permits in Davis County are required for panel upgrades, new circuits, EV charger installations, and any work that changes the service or load. Permit fees in the 840xx area typically run $150–$400 depending on the scope and the city — Layton, Clearfield, Kaysville, and Bountiful each have their own fee schedules.

Important

A licensed electrician will pull the permit on your behalf. If a contractor tells you permits aren't required for a panel upgrade or new circuit, that's a red flag. Work done without permits can cause serious problems when you sell your home.


5 questions to ask before signing any electrical quote

Question 1
Is the permit fee included?
Question 2
Does this include both labor and materials?
Question 3
Is the diagnostic fee applied toward the work if I proceed?
Question 4
How many years of experience does your crew have with this specific job type?
Question 5
What does the warranty cover, and for how long?

How to negotiate if your quote looks high

If your quote is above the ranges listed here, a simple approach works well:

Script you can use word-for-word

"I looked into typical pricing for this work in Davis County and the range I'm seeing is [X–Y]. Is there flexibility on [specific line item]?"

You don't need to be aggressive. Most contractors would rather adjust a line item than lose the job — especially if you're a serious buyer.

Have an electrical quote in hand right now?

Upload it for a free line-by-line analysis. Takes 30 seconds. Uses real local Utah pricing data and gives you negotiation scripts you can use word for word.

Check My Quote — It's Free →

No account required. Your quote data is anonymized and never shared.